Skip to main content
  • Proudly family-owned, serving our community with care

Garage Heater Repair


Our Service Guarantees Make the Difference

  • 1-Trip Guarantee: We arrive ready to get the job done efficiently.

  • Upfront Price Quote: Clear, honest pricing before any work begins.

  • Clean & Done Right: We respect your home and complete the job correctly.

Professional Garage Heater Repair in Mokena, IL

In Mokena, a garage heater does its hardest work from December through February, when overnight lows can sit in the teens for days at a time. That’s exactly when a heater that won’t light, shuts off after a few minutes, or blows cold air turns your workshop or parking space back into a freezer. Garage heater repair in Mokena, IL, finds the part that’s actually failing and gets steady heat back into the garage before pipes, supplies, or your weekend projects pay the price.

When a garage heater quits in Mokena, IL, Comfort Zone Service diagnoses and repairs it, whether it’s the unit we installed or one that came with the house. Our family has run this heating and cooling business since 1988, and our technicians are dispatched from our Mokena shop.

Signs Your Garage Heater Needs Repair

Some garage heater problems are obvious, and others build slowly until the garage just never gets warm. Watch for these warning signs:

  • No heat at all: The thermostat calls for heat, but the burner never lights.
  • Fan runs, air stays cold: The blower comes on and pushes air, but it isn’t warm.
  • Short cycling: The heater fires, runs for a minute or two, then shuts down and tries again.
  • Strange noises: Rattling, squealing, or loud clicking points to a worn motor, loose part, or ignition trouble.
  • Odd smells: A lingering burning or gas smell means you should shut the heater off and have it checked right away.
  • Rising gas bills: A heater that runs longer to keep the same temperature may have a dirty burner or a control problem.

Any of these can come from several different causes, which is why testing beats guessing at parts.

How We Diagnose and Fix Garage Heaters

When a heater won’t kick on or blows cold air, the cause is usually somewhere in the ignition and safety chain that has to work in order before the burner lights. We test each step so you only pay to replace what’s failed.

Common Garage Heater Repairs

The most common no-heat failures we find are a worn igniter or a dirty flame sensor that can’t prove the burner lit, so the gas valve shuts off for safety. Other frequent repairs include failed inducer or blower motors, stuck pressure switches, tripped limit switches from blocked airflow, faulty gas valves, and thermostat or wiring problems. Repair cost depends on which part failed, the heater’s age, and how easy the unit is to reach on the ceiling, and we’ll go over the price before any work starts.

Before you schedule, it’s worth checking a few simple things. Make sure the thermostat is set to heat and above the garage temperature, the heater’s power switch and breaker are on, and the gas valve to the unit is open. If those check out and the heater still won’t run, it’s time for a technician.

garage heater repair Mokena IL

Book Garage Heater Repair in Mokena, IL

A cold garage is more than an inconvenience once supplies start freezing and projects stall. Tell us what your heater is doing, and we’ll send a technician to find the cause and lay out your options. Schedule your garage heater repair online to get on our calendar.

Frequently Asked Questions (FAQs)


Why is my garage heater not working?

The most common reasons are a thermostat setting or power issue, a closed gas valve, or a failed part in the ignition sequence like the igniter or flame sensor. Blocked airflow can also trip the limit switch and shut the burner down. If the basics check out, a technician can test each component to find the exact cause.

What is the most common part failure that causes no heat?

In gas-fired garage heaters, a dirty flame sensor or worn hot surface igniter is behind a lot of no-heat calls. When the sensor can’t confirm a flame, the control board shuts the gas off as a safety step, so the heater tries, fails, and locks out. Cleaning or replacing that part is often a quick repair.

How do I reset my heater?

Most garage heaters reset by turning off power at the unit’s switch or breaker, waiting about a minute, and turning it back on. If the heater locks out again after a reset, there’s an underlying problem that needs to be diagnosed. Don’t keep resetting it repeatedly, and shut it off if you smell gas.

Free Estimate

Contact Form

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Don’t take our word for it

See what folks around Chicago are saying

Book Online